PRODUCTS

THE LEADING BRAND AND MANUFACTURER IN TAIWAN.

PRODUCT

Scooter/Motorcycle

Scooter/Motorcycle

FEB Series 12V / 24V 6A Automatic Battery Charger

  • Vehicle
    (圖)Motorcycle
    (圖)Car
    (圖)Truck
  • Battery
    Lead-acid Battery
  • Voltage
    12V 24V

Description

Product

FEATURE
◎ FEB Series will automatically detect 12V and 24V, adopt MCU to determine battery voltage and automatically adjust the output voltage in order to prevent human error causing the battery damage.
◎ Microcoputer controlled for multiple charging stages, with 3 charging current for motorycycle and car use.
Constant Voltage Charging Mode:Effectively control the charging voltage to prevent the damage of battery cell plate when over-charging.
◎ Constant Current Charging Mode:Control the charging current at certain steady point to prevent the battery absorbs too much current and cause the temperature increase rapidly to affect the battery service life and effiency.
◎ Equalizing Charging Mode:Charge each battery cell by 2.45V~2.60V to make sure both old and new battery can achieve saturated and not over and keeps saturation in 100%.
Floating Charging Mode:Charge each battery cell in 2.25V to make sure battery stays inthe best saturation condition and last longer.
Low Voltage Charging : When battery is over-discharged or low power for only 6V, it can still begin charge automatically.
Microcomputer Detection:Check if the battery and charger are well-connected, once it connects correctly, it will charge automatically. It would also detect the charging voltage and current during charging process to prevent over-temperature and over-charging.
Reverse Polarity:When the battery terminal is wrongly connected, the charger will not start charging.
Abnormal Battery:When the charger cannot effectively charge the battery up to 80% within 12 hours, then the charger will stop charging and the Error Indicator will light on.





Specification

  FEB-12/24-08
  Input Power  AC110V 60HZ or AC220V 50HZ
  Output Voltage  DC 12V & DC 24V
  Charging Voltage   12V@DC15V
  24V@DC30V
  Floating Voltage  12V@DC13.5V
  24V@DC27V
  Floating Current  DC 50 mA ~ DC 300 mA ( Depends on battery loading )
  Charging Current   1A / 3A / 6A 
  Charging Mode  Constant Voltage / Constant Current / Equalizing / Floating  
  Compatible Battery   4AH ~ 75AH @20HR
  Protection  1. Reverse Polarity Protection
  2. AC Input Protention
  3. Over-temperature and over-charging Protection
  4. Spark Proof Protection
  Operating Temperature    0~45℃, Humidity 90%
  Dimension ( L × W × H )    238 × 180 × 142 mm
  Weight  5 kgs

Panel

User Manual

File Name
Last Updated
Download
Play
User Manual【FEB-1224-08 / 15】Microprocessor Controlled Automatic Battery Charger
2022/02/16
FEB-122408電池充電器 | 影音操作講解
2022/02/23