SR Series 24V 15A Generator Automatic Battery Charger (Dual Meter)
◎ 4 Stages of charging, Constant Voltage, Constant Current, Equalizing and Floating.
◎ Low Voltage Charging : When battery in the low power due to self-consumption or other reasons, it will start charging automatically.
◎ There is Current Meter presents charging current, also has Voltage Meter (Optional) and LED indicator.
◎ Constant Voltage Charging Mode : Effectively control the charging voltage to prevent the damage of battery cell plate when over-charging.
◎ Constant Current Charging Mode : Control charging current at certain steady point to prevent battery absorbs too much current and cause the temperature increases rapidly to affect the battery service life and efficiency.
◎ Equalizing Charging : Charge battery cell by 2.4~2.5V to ensure each battery cell can achieve saturate d without ove r-charging and kee ps charging saturation in 100%.
◎ Microcomputer controlled technology to ensure battery absorbs equally without over-temperature and over-charging to achieve saturation.
◎ Automatic Charging Mode : When power goes out and back on, the charger will start charging automatically. After full charging, It will turn to Float charging mode and keeps the battery in 100% saturation with no loss of water.
◎ Cycle Charging Mode : When charger turns to Float charging, it will re-charge in every 15 days.
◎ Over-temperature Protection : When charger is over-temperature, it will cut off automatically to prevent burning.
◎ If charger and battery is not connected, there will be no output.
◎ DC Output reverse polarity protection.
|Input Power||AC110V 60HZ / AC220V 50HZ|
|Output Voltage||DC 24V|
|Charging Voltage||Max. DC 30V ± 0.2V|
|Charging Current||Max. 15A ± 1A|
|Floating Voltage||DC 26.4V ± 0.2V|
|Floating Current||DC 50 mA ~ DC 500 mA ( Depends on battery loading )|
|Charging Mode||Constant Voltage / Constant Current / Equalizing / Floating / Cycle Charging / Low Voltage|
|Protection|| 1. Reverse Polarity Protection|
2. AC Input Protention
3. Over-temperature and over-charging Protection
4. Spark Proof Protection
|Operating Temperature||0~45℃, Humidity 90%|
|Dimension ( L × W × H )||277 x 215 x 172 mm|