TC Series 12V 6A Automatic Battery Charger
- BatteryWET Battery MF Battery AGM Battery Deep Cycle Battery
◎ TC Series has multiple charging stages by microcoputer controlled, with 3 charging current for motorycycle and car use.
◎ Constant Voltage Charging Mode：Effectively control the charging voltage to prevent the damage of battery cell plate when over-charging.
◎ Constant Current Charging Mode：Control the charging current at certain steady point to prevent the battery absorbs too much current and cause the temperature increase rapidly to affect the battery service life and effiency.
◎ Equalizing Charging Mode：Charge each battery cell by 2.45V~2.60V to make sure both old and new battery can achieve saturated and not over and keeps saturation in 100%.
◎ Floating Charging Mode：Charge each battery cell in 2.25V to make sure battery stays inthe best saturation condition and last longer.
◎ Low Voltage Charging : When battery is over-discharged or low power for only 6V, it can still begin charge automatically.
◎ Microcomputer Detection：Check if the battery and charger are well-connected, once it connects correctly, it will charge automatically.
◎ Reverse Polarity：When the battery terminal is wrongly connected, the charger will not start charging.
◎ Abnormal Battery：When the charger cannot effectively charge the battery up to 80% within 12 hours, then the charger will stop charging and the Error Indicator will light on.
|Charging Current||1A / 3A / 6A|
|Output Voltage||12V DC (max.15.5V)|
|Input Power||AC 110V 50 / 60HZ|
|AC 220V 50 / 60HZ|
|Charging Mode||Constant Voltage / Constant Current / Equalizing / Floating|
|Compatible Battery||WET / MF / SLA / AGM / Deep-Cycle|
Battery Capacity (20HR)
|Dimension||238 x 180 x 142 mm|